The Requirements For Using An Automatic Screw Locking Machine
An automatic screw locking machine has a lot of advantages to offer. For instance, these units can be quite effective when it comes to stability, precious and efficiency. Therefore, most companies tend to make these units part of their assembly lines. So, they enjoy a great degree of productivity and efficiency. But the important thing to note is that this machine can’t handle all types of screws. Let’s take a look at the requirements of these machines.
What kind of Screws cannot be used?
The choice of screws depends on the type of head of the screw. Common types include corrugated, self-tapping, headless, round top, hex, flat top, flat-headed, and internal hexagonal, just to name a few.
The size of the round screw is between M2 and M10. These basic types are commonly used in today’s machines. On the other hand, the ones with external hex screws depend upon the machine type. Therefore, it’s important for companies to consider the requirements and schematics first.
If you go for the regular M1.2 and M4, there will be no issue of the choice of machine and there will be no risk of machine damage either. Apart from this, flat-topped, flat-headed or headless ones are not designed for these devices as compressed air blow may cause damage to the screw. It may also damage the machine itself.
Another category includes screws with gaskets. Normally, automatic screw locking machines don’t take body washer screws or any other rotating type screws. Therefore, they can be used in other machines without any issue.
Basically, it is a good idea to check the specs and schematics of the machine as regular screws will need to be modified to ensure they can be fit inside the machine. The good news is that you will get customer support and guidance from the manufacturer of the machine.
If you have to make changes to fit the screws, you can get in touch with the company and they will send an expert technician in order to make the required adjustments. So, all you need to do is phone or email the company and they will take care of the matter.
You also need to consider some quality aspects. This is to ensure that the quality of the screws is up to the mark. Besides, you need to ensure the security features, such as front batch, migraine, and bulk as well.
If the screws meet these aspects, you can rest assured that the quality is up to the mark. And this is an indicator that the machine will continue to work and won’t suffer any damage during the process. Similarly, no harm will be caused to the assembly line either.
The makers of automated screw locking units develop security measures to make sure that the machines stand the test of time. So, it always makes sense to get the best machine possible.
So, these are just some of the requirements for using an automated screw locking machine. Hope this helps.